TanklessUSA - T-M50 Tankless Water Heater

Flash Model T-M50

Call for pricing!

The T-M50, also know as "The Monster Tankless," is Takagi’s most powerful tankless water heater yet and was developed specifically for commercial applications. The T-M50 offers many benefits including the following:

380,000 BTU/U, up to 14.5 GPM (Max)

The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit.

Easy-link capability up to 4 units. You may connect up to 10 units and generate over 140 GPM using a multi-controller unit.

Features a Dual-Heat Exchanger system that allows for redundancy. In the event of an emergency, if one system goes down, the other system will still stay running.

Uses HRS copper, the most durable copper in the industry. HRS copper is stronger and harder than the standard copper, making it much more resilient against erosion and leaks.

Offers precise control of the water valves.

8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications.

7-segment LED for error codes: Remote controller is not required to pinpoint problems.

Ignition indicators: indicates which burner is fired up at the moment.

Utilizes the air-fuel ratio rod for added safety.

The drum thickness is 0.5mm, making it 25% thicker than our typical residential unit. During every ignition cycle, the heat exchangers undergo heat stress and a thicker drum increases its resistance to this stress.

Increase in fin pitch: Fins are more "spread out" which improves the durability of the heat exchanger. More space in-between the fins reduces build-up. Higher temperatures at the top of heat exchanger reduces condensation.

ASME version is coming soon. Natural Gas Input Min. 15,000 Btu Max. 380,000 LPG Input Min. 15,000 Btu Max. 380,000 Gas Connection 1" NPT Water Connection 1" NPT Natural Gas Pressure Inlet Min. 5.0" W.C. Max. 10.5" W.C. LP Gas Pressure Inlet Min. 8.0" W.C. Max. 14" W.C. Weight 112 lbs Dimensions 25.3" X 24.8" X 11.8" Ignition Electronic Ignition Electrical Supply AC 120V (60 Hz) Water Pressure Min. 15 PSI Max. 150 PSI

TM- RE30 Temperature Remote Control

TM - PC50 Pipe Cover (optional)

TM - MC01

Multi Unit Controller (Multi Unit System)

TM - DV50 Direct Vent Conversion Kit (optional)