TanklessUSA - T-M1 Tankless Water Heater

Call for pricing!

The next generation tankless water heater is called the MOBIUS Water Heater Model T-M1. Like its younger brother FLASH, the MOBIUS outperforms a traditional water heater while occupying about one-tenth the space. Refinements incorporated into the MOBIUS include increased flow range and temperature output, more precise controls and improved safety features.

Tankless water heaters can generate a continuous, unlimited supply of hot water because there is no storage tank to heat. The MOBIUS first-hour rate is over 500 gallons per hour compared to conventional 100 gallon storage tank water heater's 135 gallons per hour. However, because there is no tank to run out, MOBIUS continues to deliver at this rate while the conventional water heater runs cold. The MOBIUS has a maximum flow rate of 9.6 gallons per minute, so it's ideal for residential or commercial water heating and warm air or radiant heating system applications.

The MOBIUS is amazingly compact, with dimensions 24 inches high by 18 inches wide by 9 inches deep and a weight of only 70 pounds. It occupies less than 2.5 cubic feet compared the 24 cubic feet needed by a 100 gallon water heater. The compact design allows MOBIUS to be hung on a wall, inside or outside, installed to wherever adequate space is available as long as it is properly vented.

The thermal efficiency of the MOBIUS is over 83% using natural gas and 85% on propane gas. This is far superior to the conventional water heater efficiency. Because the MOBIUS is more efficient, it uses less fuel and is therefore more cost efficient to operate and environmentally friendly.

A unique feature of MOBIUS is its flexibility in large use applications such as big homes, hotel and motel, apartment and other commercial structures. Up to 20 MOBIUS units can be linked together using a single main control system. When installed in this manner, MOBIUS units can replace the space consuming, inefficient boilers used in most large buildings. Further, the use of MOBIUS units allows the building owner to customize the water heating system by using the correct number of units to meet the building's hot water needs. For even larger applications more than 20 units can be installed using multiple control systems. When you're using a MOBIUS multi-system, you don't have to burn a million BTU for one application - just burn as much as you need!

An added benefit for commercial applications is that, because of MOBIUS' light weight and small size, installation can be a one person job compared to the crew and equipment needed to install a boiler. Also, unlike a conventional boiler which if it fails, it eliminates all hot water to the building, a MOBIUS grouping will continue to deliver hot water even if trouble should develop with one unit.

The output temperature of the MOBIUS can be adjusted from 100 to 176 degrees. This range makes it ideal for home application as well as providing water hot enough to meet any commercial use.